Gearless Systems

Ideal for high-rise and high-speed passenger and freight elevators with speeds from 2.5 m/s and up to 64 floors. Brake solutions for use on gearless traction machines featuring high-speed electric motors powered by AC or DC current.

Warner Electric ERS VAR-07B Electrically Released Brake The ERS VAR-07 is an electrically released failsafe brake that operates in static and emergency stops. These brakes are particularly suitable for gearless motors with limited space. Redundant system in accordance with EN81-1 Extremely compact, round design EC 95/16 certified 1 shell / 2 independent braking circuits / 1 disc No air gap adjustment required Very easy installation Micro switch equipped upon request Nearly maintenance-free (further information in our service manual) Over-excitation or single voltage Available with optional dustcover and hand-release Warner Electric ERS VAR-08/ERS VAR-10 Electrically Released Brakes The ERS VAR-08 and ERS VAR-10 are designed to prevent ascending car overspeed and unintended movement. Complies with Section 2.19, ASME A.17.1 and EN 81-1 / EN 81-80. Standard torque capacity: 50 to 5000 Nm Single magnet 1 or 2 Actuators TÜV Certified Hand release upon request Warner Electric ERS VAR-09 Electrically Released Brake The ERS VAR-09 is an electrically released failsafe brake that operates in static & emergency stops. Designed to offer a double braking system to meet EN 81-1 conformity. EC 95/16 Certified Standard torque capacity: 2 x 50 Nm to 2 x 1700 Nm 2 magnets and 2 actuators/discs TÜV Certified No airgap adjustment required Very easy installation Nearly maintenance-free Overexcitation or monotension Microswitch equipped upon request Dust cover and hand release upon request Warner Electric ERS VAR-11 Electrically Released Brake The ERS VAR-11 is an electrically released failsafe caliper brake that is particularly suitable for flat gearless motors. VAR-11 models are a highly modular braking system which operates in static and/or emergency stops. Redundant capability according EN 81-1 when two or more brakes are used. Torque according to disc diameter and number of calipers Floating magnet and fixed disc EC 95/16 Certified Overexcitation TÜV Certified Very easy installation Nearly maintenance-free Very easy installation No airgap adjustment required Microswitch equipped upon request Hand release upon request Warner Electric ERS VAR-12 Electrically Released Brake The ERS VAR-12 is a highly modular, single surface drum brake. With 2 brakes, the braking system complies with EN81-1 redundancy and protects the elevator against ascending overspeed and unintended movement. EC 95/16 Certified Torque capacity according to drum diameter Overexcitation or monotension voltage TÜV Certified Large braking torques can be achieved by using several brakes Very easy installation Nearly maintenance-free Microswitch equipped upon request Hand release upon request Warner Electric ERS VAR-15 Electrically Released Brake The ERS VAR-15 is an electrically released safety brake with fixed magnets and a floating disc. In order to comply with the EN 81-1 standard, at least 2 magnets are necessary (fulfilling the redundancy requirement). Installs directly on the drive housing or additional flange EC 95/16 Certified Compact and modular design: from 2 up to 4 magnets in standard configuration Torque capacity in accordance with the diameter of braking disc and number of magnets Nearly maintenance-free Overexcitation or monotension voltage Microswitch equipped upon request Hand release on request     Twiflex Limited VCS Series Hydraulically Released Caliper Brakes The VCS Caliper is comprised of two modules located on either side of a mounting plate which could be made to accommodate brake discs of 20mm and over. Each module consists of a spring pack to provide the clamping/braking force. Minimum disc diameter is 500 mm. Protects against ascending overspeed and unintended movement on elevators Ensures stoppage in a smooth and safe manner when experiencing power or other system failure on escalators Braking force from 14 kN to 62 kN Highly modular - greater braking torques achievable with use of multiple brakes Low pad pressures - Pad area = 296.8 cm2 (2 pads) Particular strength with long, heavy-duty escalators Hydraulic power supply units also available