Geared Systems
Ideal for mid- and high-rise passenger and freight elevators with speeds from 1.0 m/s to 2.5 m/s. Brake solutions for use on conventional overhead geared machines with the car attached to cables which are counter-weighted over the drive sheave.
|
|
|
Warner Electric
ERS VAR-11
Electrically Released Brake
- The ERS VAR-11 is an electrically released failsafe caliper brake. VAR-11 models are a highly modular braking system which operates in static and/or emergency stops. Redundant capability according EN 81-1 when two or more brakes are used.
- Torque according to disc diameter and number of calipers
- Floating magnet and fixed disc
- EC 95/16 Certified
- Overexcitation
- TÜV Certified
- Very easy installation
- Nearly maintenance-free
- Very easy installation
- No airgap adjustment required
- Microswitch equipped upon request
- Hand release upon request
|
Warner Electric
ERS VAR-09
Electrically Released Brake
- The ERS VAR-09 is an electrically released failsafe brake that operates in static & emergency stops. Designed to offer a double braking system to meet EN 81-1 conformity.
- EC 95/16 Certified
- Standard torque capacity: 2 x 50 Nm to 2 x 1700 Nm
- 2 magnets and 2 actuators/discs
- TÜV Certified
- No airgap adjustment required
- Very easy installation
- Nearly maintenance-free
- Overexcitation or monotension
- Microswitch equipped upon request
- Dust cover and hand release upon request
|
Warner Electric
ERS VAR-08/ERS VAR-10
Electrically Released Brake
- The ERS VAR-08 and ERS VAR-10 are designed to prevent ascending car overspeed and unintended movement. Complies with Section 2.19, ASME A.17.1 and EN 81-1 / EN 81-80.
- Standard torque capacity: 50 to 5000 Nm
- Single magnet
- 1 or 2 Actuators
- TÜV Certified
- Hand release upon request
|
|
|
|
|
|
|
Twiflex Limited
VCS Series
Hydraulically Released Caliper Brakes
- The VCS Caliper is comprised of two modules located on either side of a mounting plate which could be made to accommodate brake discs of 20mm and over. Each module consists of a spring pack to provide the clamping/braking force. Minimum disc diameter is 500 mm.
- Protects against ascending overspeed and unintended movement on elevators
- Ensures stoppage in a smooth and safe manner when experiencing power or other system failure on escalators
- Braking force from 14 kN to 62 kN
- Highly modular - greater braking torques achievable with use of multiple brakes
- Low pad pressures - Pad area = 296.8 cm2 (2 pads)
- Particular strength with long, heavy-duty escalators
- Hydraulic power supply units also available
|
|
|
|
|
|
|
|
